CONSTRUCTION Grouts | EPILOX RANGE

Picture Coming soon
Low viscosity epoxy grout for fine crack repair. Designed to repair fine cracks in vertical, overhead or horizontal applications. |May be pumped or gravity fed, depending on the application.

Supplied in 300ml and 1.5 litre kits
Picture Coming soon
Pourable high strength epoxy grout for use in thicknesses less than 20 mm. Suitable for grouting base plates subject to continual vibration or high point loads, such as testing equipment, presses, bridge bearing pads and crane rail grouting.

Supplied in 3 litre or 15 litre kits
Picture Coming soon
Pourable, high strength, epoxy grout for use in similar applications to Epigrout S but where gap widths range from thicknesses of 20 mm to 50 mm.

Supplied in 3.5 litre and 14 litre kits.
EPILOX BINDER
Picture Coming soon
Epoxy resin system for combining with selected and graded fillers to form high strength mortars ranging from pourable to paste consistency. Wide range of potential applications.

Supplied in 1.5 litre, 6 litre and 30 litre kits
Picture Coming soon
High strength liquid epoxy binder for producing epoxy mortars and grouts when combined with selected, graded aggregates. Also suited for use as new to old concrete bonding agent.

Supplied in 4 litre and 20 litre kits.
Picture Coming soon
Non sag, high strength epoxy binder for production of paste consistency epoxy mortars for concrete repair and for grouting in starter bars and threaded rod.

Supplied in kits of 4 litres

CONSTRUCTION Grouts | PENAFLOW CEMENTITIOUS RANGE (CLASS A)

Pipe Grip Red Priming Fluid
A Class-A construction grout based on a blend of Portland cement, high quality graded aggregates and additives, which control expansion whilst the grout is in a plastic state.

Panel Grout is a general purpose grout suitable for grouting underneath precast panels and concrete sections, filling Anchor bolts, cavities, gaps, base infill's, core holes, and core filling. Shrinkage compensated. Gaseous expansion whilst in plastic state eliminates shrinkage and settlement.

Non-metallic iron content eliminates staining. Can be dry packed, rammed, trowelled or poured. Pumpable for larger applications.

Grouting from 20mm to 150mm in a single application
PENAFLOW GP
Picture Coming soon
A class A high performance construction grout based on Portland cements, high quality graded aggregates and additives which control expansion whilst the grout is in a plastic state.
PENAFLOW UW
Picture Coming soon
Is a high performance free flowing grout for applications requiring grouting under water or in tidal zones. Penaflow UW is based on Portland cements, graded aggregates and chemical additives which control expansion whilst grout is in a plastic state.

There is no wash out of the cement matrix and the grout has the ability to displace water when submerged or immersed in water. Suitable for use in bridge columns, dams, concrete pilings, wharf columns. Displaces water effectively. Complete void filling resulting from gaseous expansion. High strength. Exceptional flow characteristics.

CONSTRUCTION Grouts | PENATECH CEMENTITIOUS RANGE (CLASS C)

PENATECH GROUT
Penatech Grout
High strength, precision Class C grout. Non shrink dual expansion compensates for shrinkage in both the plastic and hardened state. Penatech HS complies with US Corp of Engineers Specification of non-shrink grout, CRDC 621-82A and ATSM C1107-91 (Type C). Machine base plates where critical grouting application is required. Designed for applications subject to dynamic loads and where continuous vibration is present, bridge bearing pads, crane rail sole plates, pre-cast concrete sections/ panels, anchor bolt fillings. Filling in core holes, cavities, gaps and base infill's. High performance structural grouting.
Penatech Hes
Class C high quality, free flowing non shrink, high early strength development and high ultimate strength gain cementitious grout. Penatech HES complies with US Corp of Engineers Spec CRDC 621-82A and ATSM C1107-91 for Class C grout. Cementitious grouting where high early strength is required.?Heavy duty support grout beneath high load machine base plates. Precision grouting applications, anchoring bolt holes, bridge bearing pads, crane rail plates, pre-cast concrete sections, cavities, gaps and recesses. Rapid reinstatement of equipment, minimizes downtime. Grouting requiring dynamic load bearing and applications subject to continuous vibration.
PENATECH GP
Picture Coming soon
General purpose high strength, precision Class C grout. Non shrink dual expansion compensates for shrinkage in both the plastic and hardened state. Penatech GP complies with US Corp of Engineers Specification of non-shrink grout, CRDC 621-82A and ATSM C1107-91 (Type C).

Machine base plates where critical grouting application is required. Designed for applications subject to dynamic loads and where continuous vibration is present, bridge bearing pads, crane rail sole plates, pre-cast concrete sections/ panels, anchor bolt fillings. Filling in core holes, cavities, gaps and base infill's. High performance structural grouting.
PENATECH LA
Picture Coming soon
High performance Class C micro-concrete designed for grouting large areas with no shrinking or cracking. Penatech LA is capable of grouting thicknesses up to 600mm deep in a single application.

It conforms and complies with the requirements of ASTM C1107-91 and CRD-C621-82A ( type C grout). Dual expansion compensates for shrinkage in the plastic and hardened state. Large volume grouting up to 600mm deep.

Suitable for bridge bearing soffits and grouting requiring high ultimate strength applications subject to dynamic loads. Its low exotherm reduces cracking and shrinkage.